Confirm-SecureBootUEFI — by Microsoft Learn

intermediatepageLink only (©)

Documents the PowerShell cmdlet that returns True or False for whether Secure Boot is on. It needs an elevated prompt and prints 'Cmdlet not supported on this platform' on legacy BIOS machines.

Quick steps

Open PowerShell as administrator
Run Confirm-SecureBootUEFI

Paraphrased from the source. Menus can differ by version, so check the original for full details.

Read the full article on learn.microsoft.com

Source: Confirm-SecureBootUEFI by Microsoft Learn. Licence: Link only (©).

Source reviewed: 2026-11-02
Link checked: 2026-11-02
Tested hands-on: Not by Oddbyte.Me

secure bootpowershelluefi

More in Hardware & Firmware

Dell BIOS and UEFI Update: Download and Installation Guide — by Dell Support

intermediatepage

Dell's guide to checking and updating BIOS. Firmware flashing carries risk: stay on AC power, suspend BitLocker, remove BIOS and drive passwords first, and use Dell's BIOS Recovery if an update fails.

How to Clear CMOS (ASUS motherboards) — by ASUS Support

intermediatepage

Three ways to clear CMOS: the CLR_CMOS button, shorting the CLRTC pins, or removing the battery. Clearing erases BIOS settings and password; always power off and unplug first.

How to Clear CMOS to Reset BIOS Settings (Intel desktop boards) — by Intel Support

intermediatepage

Intel's jumper and battery methods for resetting BIOS settings on boards with boxed desktop processors. Move the jumper from pins 1-2 to 2-3 (or remove the battery) for 1 to 5 minutes. Check your board manual first.